GX2355S
Owner’s Manual
page 29
6.7.2
Receiving a Shore to Ship Call
After a DSC Telephone call from a shore station has been received the radio
will automatically be switched to the MariTel Marine operator channel.
1. When the transceiver receives the telephone call
starting signal from the shore, the alarm will sound.
2. To take the incoming call, press the
PTT
and
start talking to the person.
3. To end the call, press the
CALL/SET
key.
4. When the transceiver has received the
telephone call ending signal, the transceiver is
switched to the previous channel and the
elapsed time will be shown as the illustration on
the left. If no elapsed time data is received "- - : -
- :- - " will be shown.
6.7.3
Resend Telephone Call Signal
When you send starting or ending telephone call signal to the coast station
and you receive no acknowledgment signal from coast station during 8
seconds or more, Resending menu will appear. You can resend the
telephone call with this menu.
1. You receive no acknowledgment signal from
coast station, the dot-matrix area of the LCD will
be as shown in the illustration on the left.
2. Turn the
Channel Selector
knob to select SEND.
To exit the Telephone Call mode, turn the
Channel Selector
knob
to select EXIT and press the
CALL/SET
key.
6.7.4
Resend Telephone Call When Receive Busy Signal
When you send starting telephone call signal to the coast station and you
receive Busy signal from coast station, a menu will appear. You can
resend the telephone call with this menu.
1. You receive busy signal from coast station, the
dot-matrix area of the LCD will be as shown in
the illustration on the left.
2. Turn the
Channel Selector
knob to select SEND.
To exit the telephone call, turn the
Channel Selector
knob to select
EXIT and press the
CALL/SET
key.
NO REPLY
MIKE
>SEND
EXIT
A
UNATTENDED
MIKE
>SEND
EXIT
A
HI USA
TELEPHONE
>
END CALL
TELEPHONE
CALL FINISHED
ELPSD TIME
00 : 03 : 25
TELEPHONE
CALL FINISHED
ELPSD TIME
-- : -- : --
