Page 18
Radar Installation Manual
1. From the Chart page, press
[MENU]
. Move the ShuttlePoint knob to highlight
SETUP
MENU
and press
[ENT]
.
2. Move the ShuttlePoint knob to highlight
ADVANCED SETUP
and press
[ENT]
.
3. Move the ShuttlePoint knob to highlight
IN/OUT CONNECTIONS
and press
[ENT]
.
4. Move the ShuttlePoint knob to highlight
PORT 1 INPUT
and press
[ENT]
.
5. Move the ShuttlePoint knob up/down to select
RADAR
and press
[ENT]
.
6. Press
[CLR]
or move the ShuttlePoint knob to the left until the Chart page is shown.
2.7.2 CPV350 Connections
A switch MUST be connected
to turn the Radar On or Off
Radar
Switch
Battery Switch
Battery
RADAR CABLE
WIRE COL. FUNCTION
BLACK
DATA GROUND
ORANGE
DATA OUT+
YELLOW
DATA OUT-
BROWN
DATA IN+
RED
DATA IN-
GREEN
POWER ON/OFF SWITCH
BLUE
POWER ON/OFF SWITCH
BLACK
RADAR BATTERY GROUND
WHITE
RADAR BATTERY POSITIVE
PLOTTER CABLE
WIRE COLOR FUNCTION
GREEN
GND
No connection AUX OUT+
1 (TX+)
BLUE (Port 1)
INPUT+ (RX+)
BLACK
POWER- /GND
RED
POWER+
BROWN
(Port
)
Breaker panel
ACC Cable
Figure 2.7.2 - CPV350 Connections
