Standard Horizon QUANTUM Series GX3500S, Owner'S Manual

Page: 74 / 100

GX3500S Page 74
13.4 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “ 11
DIGITAL SELECTIVE CALLING ” and section “ 12 RADIO SETUP MODE ” for
details). The LAMP , CONTRAST , and KEY BEEP menu item accessed from the
RAM+ only controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [
CALL/SET
] key until “
RADIO SETUP ” menu ap-
pears.
2. Press the [
]/[ ] key to select “
RADIO SETUP ” or “ DSC SETUP ” menu.
3. Press the [ CALL/SET
] key, then select the menu item you wish to work on
by pressing the [
]/[ ] key.
4. Press the [ CALL/SET
] key.
5. Press the [
]/[ ] key to change the value or condition for the menu item,
then press the [ CALL/SET ] key to save the new setting.
6. Press the [
]/[ ] key to select “
EXIT ,” then press the [ CALL/SET
] key to
return to the normal operation.
RADIO SETUP-menu DSC SETUP-menu
NOTE
When setup menu is selected, the GX3500S will be temporarily disabled
until the RAM+ mic, exits from the setup mode.