Standard Horizon QUANTUM Series GX3500S, Owner'S Manual

Page: 64 / 100

GX3500S Page 64
12.7 SCAN RESUME TIME
This selection is used to select the time the GX3500S waits after a transmis-
sion ends before starting scanning.
1. Press and hold down the [ CALL
(
MENU
)] key until
“ Radio Setup ” menu appears.
2. Press the [ ENT
] key, then select “
SCAN Resume ” in
the “ Radio Setup ” menu with the CHANNEL selec-
tor knob.
3. Press the [ ENT
] key.
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
“
1sec ,” “ 2sec ,” “ 3sec ,” or “ Off .” In the “ Off ” selec-
tion, the scanner will resume after the other station
stops transmitting (carrier drops).
5. Press the [ ENT
] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [ 16/9
] key.
12.8 KEY BEEP (ON/OFF)
This selection allows the beep tone when a key is pressed to be turned off.
1. Press and hold down the [ CALL
(
MENU
)] key until
“ Radio Setup ” menu appears.
2. Press the [ ENT
] key, then select “
Key Beep ” in the
“ Radio Setup ” menu with the CHANNEL selector
knob.
3. Press the [ ENT
] key.
4. Turn the CHANNEL selector knob to select “ On ” or
“ Off .”
5. Press the [ ENT
] key to set the key beep condition.
6. To exit this menu and return to radio operation mode
press the [ 16/9
] key.
NOTE
Emergency alarm and beeps for DSC operation cannot be turned OFF.