manualshive.com logo in svg

Standard Horizon PF-P320, Service Manual

Share
Download
Standard Horizon PF-P320 Service Manual Download Page 9

(4)

2nd Buckle

Stopper

Deflector

Delivery Belt

Fold Roller

1st Buckle

3rd Drive Roller

2nd Drive Roller

1st Drive Roller

Feed Roller

Deflector

Deflector

3. Sheet Flow

1. Feed roller feeds sheet to 1st drive roller.

2. Sheet is nipped between 1st drive roller and

fold roller and then transported to 1st
buckle.

3. When sheet reaches to stopper in 1st buckle,

sheet is buckled and the buckled part of
sheet is nipped between 2nd drive roller and
fold roller.

4-1. In the case of single fold, deflector moves

up and sheet is delivered to delivery belt.

4-2. In the case of the other folding patterns,

deflector moves down and sheet folded
between 2nd drive roller and fold roller is
transported to 2nd buckle.

5. When sheet reaches to stopper in 2nd

buckle, sheet is buckled and the buckled part
of sheet is nipped between 3rd drive roller
and fold roller.

6. Sheet is folded and delivered to delivery

belts.

The Other Folding Patterns

Single Fold

Summary of Contents for PF-P320





























Reviews:

No comments

Brands by name

Popular brands

Load more brands