Standard Horizon PF-P310, Operator'S Manual

Page: 22 / 40

2. Operation Procedure
16
2
1
1
2
Folded
Line
Feed Guide
Feed Guide
Support Roller
3.
Perform step 1 through 4 in "2-1 Opera-
tion Procedure" (Page 8) and pile sheets
on feed tray so that fold edge faces to
near side.
NOTE
Do not pile sheet more than half height of
feed guide. If folded sheet is piled too much
on feed tray at once, sheet is not fed
straightly.
4.
Set feed guides.
4-1.
When sheet width is less than 185 mm
(7.28").
- Slide feed guide 1 fully far side and
then set feed guide 2 .
4-2.
When sheet width is more than 185 mm
(7.28").
- Slide feed guide 2 fully far side and
then set feed guide 1 .
5.
Set support rollers.
- Place support roller on far side at 20 mm
inside from edge of sheets.
- Place support roller on near side as near
as possible to fold edge.
2-3 Cross Fold/12-Page Letter Fold