Standard Horizon PC-35, Instruction Manual, Page: 23 / 49

16
4. After Cutting
4 5
6
3
2
1
4-1 Original Condition
Clamper Hand Wheel
Clamper
Cut Button B
Cut Button A
Clamper must be lowered to the bottom after
finishing operation.
1.
Lower clamper to the bottom by turning
clamper hand wheel clockwise.
2.
If knife remains on half way, press cut
button A and B separately with the interval
of 0.5 seconds or more to return the knife
to the home position.
4-2 Power off
P O W
E R
C U T
T E R
B
O F F
O N
Key Switch
Power is turned off.
WARNING
- Only authorized operators should
have access to key switch.
1.
Turn off power by turning key switch
counterclockwise.
2.
Pull out key and keep it.
Key