Standard Horizon PC-35, Instruction Manual

Page: 16 / 49

9
2. Safety Function Check
2-3 Check on Safe Functions
4 5
6
3
2
1
Clamper Hand Wheel
Front Cover
Cut Button A
Cut Button B
WARNING
- Do not put your hands under knife
while power is on.
- Assign only "ONE" operator to oper-
ate PC-45.
If your PC-45 do not work as shown in this
book, ask your local dealer to fix the PC-45.
2-3-2 Check on Automatic Return of Knife
Check that knife at bottom position returns to
home position automatically and then stops.
1.
Press cut buttons A and B at the same
time.
2.
Release your hands from cut buttons when
knife is on the way to home position.
- Check that knife returns to home position
without stopping and then stops at home
position.
2-3-3 Check on One Cycle
Check that knife remains stationary if cut
buttons are continued to press after knife
returns to home position.
1.
Continue pressing to cut buttons about 5
seconds after knife returns to home posi-
tion. Check that knife does not work
again.
2-3-1 Check on Front Cover
Check that knife do not work while front
cover is open.
1.
Lower clamper to the bottom with clamper
hand wheel.
2.
Open front cover.
3.
Check that knife does not work in spite of
pressing cut buttons A and B at the same
time.
4.
Close front cover.
4 5
6
3
2
1
Knife
Cut Button B
Cut Button A
Next, check that knife remains stationary
unless both hands are released from cut
buttons.
2.
Release your hand from cut button B with
cut button A pressed.
3.
Press cut button B again. Check that knife
does not work.