REMOVAL AND FITTING THE FACE PANEL
Removal
Before removing the face panel, turn the unit OFF by pressing the
PWR
button.
1. Press the release button to release the left-hand end of the
face panel.
2. Lift the front panel out towards you.
After removing the face panel, place it inside the supplied case to protect it
from damage. Do not leave it in a position where it could be exposed to direct
sunlight.
Refitting
1. Make sure the face panel is the right way up as it cannot be attached
upside down.
2. Fit the right-hand end of the face panel into the tabs inside the right-hand
end of the unit.
3. Gently press the left-hand end of the face panel into place until it clicks.
Only light pressure is required.
MST660 Owner’s Manual Page 5
automatically reverts back to the previous display after 5 seconds.
Press and hold the DSP (Display) button for 2 seconds to enter the clock
setting mode.
22. Insert the CD into this slot with the label facing upwards.
23. Press REL button to unlock face panel for removal.
Release
Button
MST660 I.M.-2 21/12/99 1:26 PM Page 7
