MST660 Owner’s Manual Page 11
Antenna Connections
Connect an AM/FM marine antenna to the antenna socket, which extends
from the rear of the MST660.
RESET BUTTON
When the installation is complete, remove the front panel and press the Reset
button using a ball point pen or similar (see PRECAUTIONS on page 2). This
will ensure the MST660 is ready to be switched on for the first time. If at any
time the controls do not seem to work (after replacing the vessels battery for
example), press the Reset button to reset the microcomputer inside the
MST660.
FUSE REPLACEMENT
If any of the fuses blow, replace them with the following:
Red ‘B’ lead: 10 Amp, 3AG.
Orange ‘Power B+’ lead: 1 Amp, 3AG.
MST660 I.M.-2 21/12/99 1:26 PM Page 13