PRECAUTIONS
•
If you are connecting your MST660 for the first time or have just
reconnected your boat battery and you are experiencing problems with the
MST660’s operation, we suggest you try resetting the unit. The reset
button is located under the removable face panel (see page 5 for
instructions on removing and refitting the face panel). Simply press the
reset button with a ball point pen or similar. You can then refit the
face panel.
•
Do not insert anything other than audio compact discs into the disc slot.
The CD mechanism contains precision laser equipment which could be
damaged by inserting foreign objects.
•
The station memories and clock time are retained only while the red
‘Battery’ lead is connected (see Installation section). If the battery is
disconnected or switched off at the master switch, or if the unit is removed
from the vessel, the station memories will be lost and the clock will need to
be reset.
Handling Compact Discs
•
Handle the CD by its edge. Avoid touching the disc’s surface.
•
Store your CDs away from direct sunlight or heat sources. Keeping the CD
stored in its original case will help to keep it flat.
•
Clean the CD with a soft cloth. Clean from the center to the outer edge (see
diagram) rather than in a circular motion. Do not use solvents.
Page 2 Owner’s Manual MST660
Reset
Button
Handling
Cleaning
MST660 I.M.-2 21/12/99 1:26 PM Page 4
