HX460S
Page 22
5. BATTERY
The
CNB460
is a high performance Lithium-Ion battery providing high ca-
pacity in a very compact package.
CAUTION
To avoid risk of explosion and injury,
CNB460
battery pack should only
be removed, charged or recharged in non-hazardous environments.
5.1 BATTERY CHARGING
If the radio has never been used, or its charge is depleted, it may be charged
by connecting the
NC-72
battery charger, as shown in the illustration. If 12V
DC power is available, the optional
E-DC-6
or the
E-DC-19
DC adapter with
cigarette plug may be used for charging the battery. The
NC-72
,
E-DC-6
and
E-DC-19
will charge a completely discharged
CNB460
battery pack in
about 3 hours.
5.2 BATTERY REMOVAL/INSTALLATION
1. Turn the transceiver off.
2. To remove, open the Battery Pack Latch on the bottom of the trans-
ceiver, then slide the battery downward and out from the transceiver.
3. To install, insert the battery pack into the battery compartment on the
back of the transceiver, then close the Battery Pack Latch until it locks in
place with a “click.”
Close the Battery Pack Latch
Insert the Battery Pack
Figure 6
Summary of Contents for HX460S
Page 7: ...HX460S Page 5 Figure1 Controls and Connectors ...
Page 30: ...HX460S MEMO ...
Page 31: ...HX460S ...
