Page 126
GX2200
16 CMP30
(
RAM3
)
REMOTE MIC OPERATION
When a remote microphone is connected to the
GX2200
, all VHF, DSC,
setup menus, AIS, Waypoint, Compass functions and PA/Fog modes can
be remotely operated. The
CMP30
’s operation is same as
GX2200
except
the receiver audio volume setting and squelch level setting. The reason for
the same operation is to make the operation of the radio and
CMP30
mic
easy. For specific operation of the
CMP30
mic review sections in the radio
manual. The
CMP30
is supplied with 23 feet (7 m) of routing cable and can
be extended up to 70 feet (21 m) using three 23 feet (7 m) extension cables
model
CT-100
. The Intercom feature can be used between the
CMP30
and
the
GX2200
. In addition, speaker wires are supplied at the panel mount of
the routing cable for external speakers to be connected in noisy environ-
ments.
16.1 REMOTE MIC CONTROLS
Key
Toggles between high and low power. When the key is pressed while
the transceiver is on CH13 or CH67, the power is temporarily switched
from LO to HI until the
PTT
switch is released. The key does not func-
tion on transmit inhibited and low-power only channels.
