Standard Horizon Eclipse GX1400, Owner'S Manual

Page: 78 / 91

76
11.5.5 Reset
You may reset the memory and settings of the setup categories independently
or return the transceiver to the original factory setting.
1. [
]

“
SETUP
”

“
CONFIGURATION
”

“
RESET
”
2. Press the [▲] or [▼] key to select the desired
category. You can select one from “ DSC SETUP ”,
“ CH SETUP ”, “ GPS SETUP ”,“ CONFIGURATION ”,
“ FACTORY ”*
1
(all settings except the “MMSI” and
“ATIS”*
2
will be initialized), “ USER MMSI ”, or “ ATIS
CODE ”*
2
.
*1 Depending on the radio setting.
*2 GX1400GPS/E only
For details on resetting “
USER MMSI ” and “ ATIS
CODE ”, refer to next section.
BACK SELECT
RESET
DSC SETUP
CH SETUP
GPS SETUP
CONFIGURATION
3. Press the [
SELECT
] soft key.
4. Press the [ YES ] soft key. (To cancel, press the
[
NO
] soft key.)
YES NO
RESET
DSC SETUP
DO you want to
reset it?
5. Press the [ OK ] soft key.
OK
RESET
DSC SETUP
COMPLETE!
6. Press the [
CLR
] key to return to radio operation.
11.5.6 Reset the USER MMSI and ATIS CODE
If the MMSI number and ATIS* code (*:GX1400GPS/E only) need to be reset.
Please contact Standard Horizon to obtain the required reset codes.
To request the Reset Code
Contact Standard Horizon and confirm the following required information.
● The Information Necessary to obtain the Reset Code
• Model name
• Serial number
• Current MMSI number or/and ATIS code
(To check the MMSI number and ATIS code, refer to “ 8.6.1 Mari-
time Mobile Service Identity (MMSI) ” or “ 11.3.1 ATIS Code Setup
(GX1400GPS/E only) ”.
• Request codes for the MMSI number or/and the ATIS code