GX1100E
Page 50
procedure until all nine spaces of the MMSI num-
ber which you want to contact are entered.
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the microphone’s [
H/L
] key until
the wrong nunber is selected, then move the chan-
nel knob to correct the entry.
7. When finished entering the MMSI number, press
and hold the [
ENT
] key.
8. Press the [
ENT
] key to send your position to the
selected vessel.
9. Press the [
CLR
(
WX
)] key to return the display to
the radio operation mode display.
9.9.3 Receiving a DSC Position Report Call
When another vessel transmits their location to the
GX1100E
the following will
happen:
1. When the Position Report Call is received, a ring-
ing sound will be produced and the display shows
received data. Transfer the received data to any
Standard Horizon GPS Chart plotter if connected.
2. Press any key to stop ringing.
3. Press the [
S
(
UP
)] / [
T
(
DOWN
)] keys to change
the display to view the received data.
4. Press the [
CLR
(
WX
)] key to return the display to
the radio operation mode display.
