GX1100E
Page 36
Manual Calling
You may enter an MMSI number manually to contact without storing it in the
Individual Directory.
1. Press the [
CALL
(
MENU
)] key. The “
DSC MENU
DSC MENU
DSC MENU
DSC MENU
DSC MENU
”
will appear.
2. Press the [
S
(
UP
)] / [
T
(
DOWN
)] keys to select
“
INDIVIDUAL
INDIVIDUAL
INDIVIDUAL
INDIVIDUAL
INDIVIDUAL
”. (To cancel, press the [
16/9
] or
[
CLR
(
WX
)] key.)
3. Press the [
ENT
] key. The transceiver will beep,
and the “Individual directory” will appear.
4. Press the [
S
(
UP
)] / [
T
(
DOWN
)] keys to select
“
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
”, then press the [
ENT
] key.
5. Press the [
S
(
UP
)] / [
T
(
DOWN
)] keys to scroll
through numbers, 0-9. To enter the desired num-
ber and move one space to the right, press the
[
ENT
] key. Repeat this procedure until all nine
spaces of the MMSI number which you want to
contact are entered.
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the microphone’s [
H/L
] key until
the wrong number is selected, then move the chan-
nel knob to correct the entry.
7. When finished entering the MMSI number, press
and hold the [
ENT
] key.
8. Press the [
ENT
] key, then press the [
S
(
UP
)] /
[
T
(
DOWN
)] keys to select the operating channel you
want to communicate on and press the [
ENT
] key.
9. Press the [
ENT
] key again to transmit the individual
DSC signal.
10. After INDIVIDUAL CALL is transmitted, if the reply
signal is not received, “
WAIT FOR ACK
WAIT FOR ACK
WAIT FOR ACK
WAIT FOR ACK
WAIT FOR ACK
” notation will
show on the display. To send the call again, press
the [
T
(
DOWN
)] key followed by the [
ENT
] key.
11. When an individual call acknowledgment is re-
ceived, the established channel is automatically
changed to the channel which is selected on step
8 above and a ringing tone sounds.
12. Press the [
CLR
(
WX
)] key to listen to the channel
to make sure it is not busy, then key the micro-
phone and call the other vessel you desire to communicate with.
