background image

LIMITED WARRANTY 

STANDARD COMMUNICATIONS CORP. ("SCC") warrants, to the original purchaser only, each new
Marine Communications Product ("Product") manufactured and/or supplied by SCC against defects in
material and workmanship under normal use and service for a period of time from the date of purchase
as follows:

MST65 Marine AM/FM Stereo System - 1 year

To receive warranty service, the purchaser must deliver the Product, transportation and insurance
prepaid, to SCC Standard Communications Corp.,115 North Wright Brothers Drive, Salt Lake City, Utah
84116-2838. Include proof of purchase indicating model, serial number, and date of purchase. SCC will
return the Product to the purchaser freight prepaid. Products purchased prior to January 1, 1991 will
bear the SCC warranty terms in effect prior to that date.

In the event of a defect, malfunction or failure of a Product during the warranty period, SCC's liability for
any breach of contract or any breach of express or implied warranties in connection with the sale of
Products shall be limited solely to repair or replacement, at its option, of the Product or part(s) therein
which, upon examination by SCC, shall appear to be defective or not up to factory specifications. SCC
may, at its option, repair or replace parts of subassemblies with new or reconditioned parts and
subassemblies. Parts thus repaired or replaced are warranted for the balance of the original applicable
warranty.

SCC will not warrant installation, maintenance or service of the Products. In all instances, SCC's liability
for damages shall not exceed in purchase price of the defective Product. This warranty only extends to
Products sold within the 50 States of the United States of America and District of Columbia.

SCC will pay all labor and replacement parts charges incurred in providing the warranty service except
where purchaser abuse or other qualifying exceptions exist. The purchaser must pay any transportation
expenses incurred in returning the Product to SCC for service.

This limited warranty does not extend to any Product which has been subjected to misuse, neglect,
accident, incorrect wiring by anyone other than SCC, improper installation, or subjected to use in
violation of instructions furnished by SCC, nor does this warranty extend to Products on which the serial
number has been removed, defaced, or changed. SCC cannot be responsible in any way for ancillary
equipment not furnished by SCC which is attached to or used in connection with SCC's Products, or the
operation of the Product with any ancillary equipment and all such equipment is expressly excluded from
this warranty. SCC disclaims liability for range, coverage, or operation of the Product and ancillary
equipment as a whole under this warranty. SCC reserves the right to make changes or improvements in
Products, during subsequent production, without incurring the obligation to install such changes or
improvements on previously manufactured Products.

The implied warranties which the law imposes on the sale of this Product are expressly LIMITED in
duration, to the time period specified above. SCC shall not be liable under any circumstances for
consequential damages resulting from the use and operation of this Product, or from the breach of this
LIMITED WARRANTY, any implied warranties, or any contract with SCC. IN CONNECTION WITH THE
SALE OF ITS PRODUCTS, SCC MAKES NO WARRANTIES, EXPRESS OR IMPLIED AS TO THE
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, EXCEPT AS
EXPRESSLY SET FORTH HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation
on how long an implied warranty lasts, so the above limitations or exclusions may not apply. This
warranty gives specific legal rights, and there may be other rights which may vary from state to state.

ONLY PRODUCTS SOLD ON OR AFTER JANUARY 1, 1991 WILL BE COVERED UNDER THE TERMS
OF THIS LIMITED WARRANTY.

Page 14                                                           Owner’s Manual                                                           MST65

Summary of Contents for MST65





















Reviews: