INTRODUCTION
Thank you and congratulations on your purchase of the STAND AID
Model 1600. We are certain the benefits you receive from standing
with our STAND AID will enhance your health and outlook on life.
GENERAL INFORMATION
After unpacking your Stand Aid 1600, place any parts that are not
attached to the Stand Aid 1600 on the floor, using the parts list to get
familiar with the unit and parts. On the standard Stand Aid 1600 there
should be no tools needed to adjust the unit for your standing
pleasure. The standard unit with a wheel kit option will require a
couple of tools, 2 – open end 7/16” wrenches. The standard unit with
the Safety Gate option may require a 3/16” Allen wrench. Check
your packing list for the options that came with your unit.
Parts included in the standard unit, 1 – Sling to your specifica-
tion, 1 – Safety Belt, 2 – Heel straps, 1 – Toe Strap.
Parts included in the standard unit with Wheel Kit option,
includes all parts from the standard unit, and 4 – wheel brackets with
locking caster wheels, and bolts and nuts. Two of these wheel bracket
and locking caster wheels will need to be placed and bolted onto the
frame of the unit.
Parts included in the standard unit with Safety Gate option, in-
cludes all parts from the standard unit, and Safety Gate brackets,
Safety Gate arm, 1 – 2” Safety Gate pad and 1– 4” Safety Gate pad.
This option will be placed onto the machine for your convenience.
Another option with the Safety Gate is the Back Support, which also
will be bolted onto the Safety Gate already, you will need to place the
Back Support “top” onto the Back Support “bottom”, and tighten the
knob to your desired height.
Page 2
