Page 13
19
17
16
18
15
14
13
12
11
10
9
8
7
6
5
4
SAFETY GATE
3
2
1
1. Attach the left and right extension tubes (#1 & #2) to
the mainframe, secure the clamps to the mainframe
tubes both sides.
Assembly Instructions
1.
8215-2057
1
Right Safety Gate Ext.
2.
8214-2028
1
Left Safety Gate Ext.
3.
8213-2025
1
Safety Gate Lock
4.
8210-2026
1
Safety Gate
5.
8211-2023
1
Swivel Hinge
6.
8212-2024
1
Gate Mount
7.
8220-2029
1
Back Support Mount
8.
8200-2045
4
Back Support Mount Links
9.
8222-2031
1
Back Support Adjust
10.
8221-2030
1
Back Support Vert. Slide
11.
8225-2034
1
Back Pad Mount
12.
8270-2045
1
Rt. Pad Mount Adjuster
13.
8270-2046
1
Lt. Pad Mount Adjuster
14.
2600-3010
1
Back Support Pad
15.
8200-2038
1
Outside Pad Mount
16.
8200-2052
1
Flip-Up Pad Mount
17.
8200-2053
1
Flip-Up Pad Slide Adjust
18.
2600-3012
2
Lateral Wide Pad
19.
2500-3000
4
Adjustment Knob
20.
2500-3011
1
1/4” Lock Pin (not shown)
REF. # PART # QTY.
DESCRIPTION
Parts List
STAND AID 1600 (optional) SAFETY GATE
LATERAL BACK SUPPORT
The “SAFETY GATE and LATERAL BACK SUPPORT” can also be added
for those requiring more back support. This attachment easily clamps onto the
Safety Gate and comes with an extra safety belt to hold the upper body snug
against the back rest for additional support. The standard back support is re-
placed with the back support below.
2. Attach the safety gate lock (#3) to the left or right extension tube
by tightening the clamp. Height adjustment may be required later.
3. Attach the safety gate assembly (#4, #5 , & #6) to the left or right
extension tube (#2) by tightening the gate mount (#6) clamps
around tube. Height adjustment may be required later.
4. Assemble the back support adjustment assembly (#7, #9, & #10) by
sliding The tubes together, #10 slides into #9, and slides over the
back support mount (#7) attach using lock pin (#20) . Secure the
adjusting knob (#19) at desired height. Attach this assembly to the
safety gate using the mounting strips (#8) and 1/4“ X 1-1/2“ bolts and
locknuts.
5. Assemble the back pad (#14) to the back pad mount (#11) with
10-24 x 1/2“ bolt. Insert this assembly into the back support
vertical slide (#10), and secure with the adjusting knob (#19).
6. Attach the lateral wide pad (#18) to the outside pad mount (#15)
and to the flip-up pad mount (#16) using 10-24 X 1/2” bolts.
7. Slide the outside pad mount (#15) into the pad mount adjuster (#12).
Secure the flip-up pad mount (#16) to the flip-up pad adjust slide (#17)
using a 1/4” X 1-1/2” bolt and locknut. Slide this assembly into the
other pad mount adjuster (#13). Slide both of these pad mount
assemblies onto the back support adjust (#9), and secure with the
adjusting knobs (#19). Be sure to install the flip-up pad assembly
(#16 & #17) on the same side as the safety gate swivel hinge (#5).
Width adjustment may be required later.
LATERAL BACK SUPPORT
