ASSEMBLY INSTRUCTIONS
9
STEP 6
NOTE:
The
RIGHT PEDAL(39)
has an
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL
(39)
has right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(38)
has
an
L
stamped on the end of the pedal shaft. The
LEFT PEDAL(38)
has left hand threads and is
tightened by turning counterclockwise.
Loosen the
SOCKET HEAD BOLT(M6x1x10mm)(109)
fitted on the
RIGHT DISC CRANK(28).
Thread
the
RIGHT PEDAL(39)
to the
RIGHT DISC CRANK(28)
as shown. Tighten the pedal securely. The
shoulder of the
PEDALS(38, 39)
should be in contact with the
DISC CRANKS(24, 28)
when securely
tightened. For more security, tighten the
SOCKET HEAD BOLT(M6x1x10mm)(109)
into the
RIGHT
DISC CRANK(28).
Do the same to attach the
LEFT PEDAL(38)
to the
LEFT DISC CRANK(24).
STEP 7
Connect the
SENSOR WIRE(59)
to the
CONNECTION WIRE(63),
then attach the
COMPUTER
SUPPORT(48)
to the front of the
MAIN FRAME(1)
with
FLAT SOCKET HEAD BOLTS(M8x1.25x30mm)
(105).
NOTE:
Be careful not to damage the wires when attaching the
COMPUTER SUPPORT(48).
Shoulder
Shoulder
