ASSEMBLY INSTRUCTIONS
7
Shoulder
Shoulder
STEP 2
NOTE:
The
RIGHT PEDAL(8)
has an
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(8)
has right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(7)
has an
L
stamped on the end of the pedal shaft. The
LEFT PEDAL(7)
has left hand threads and is
tightened by turning counterclockwise.
Thread the
LEFT PEDAL(7)
to the right side of the
LEFT CRANK(18)
as shown. Tighten the pedal
securely. The shoulder of the
PEDALS(7, 8)
should be in contact with the
CRANKS(18, 19)
when
securely tightened. Do the same to attach the
RIGHT PEDAL(8)
to the
RIGHT CRANK(19).
STEP 3
Install two AA batteries into the
METER(17),
the batteries are not included. See page 8 for detailed
battery installation instructions. Slide the
METER(17)
onto the plate on the
MAIN FRAME(1).