Stamina Pilates Premier XP 55-5510C, Owner'S Manual

Page: 6 / 15

ASSEMBLY INSTRUCTIONS
STEP 2
Remove the paper covering from the foam tape inside the
FRONT COVER(7)
and
REAR COVER(8).
Place the
FRONT COVER(7)
over the
FRONT FRAME(1).
Press the
FRONT COVER(7)
securely in
place. Place the
REAR COVER(8)
over the
REAR FRAME(2).
Press the
REAR COVER(8)
securely
in place.
NOTE: The securing
SCREWS(M6 x 35mm)(37)
for the
PULLEY ASSEMBLY(22)
on each side may
need to be loosened to allow the
REAR COVER(8)
to fit securely over the frame. Refer to
illustration. When retightening the screws for the
PULLEY ASSEMBLY(22)
do not over tighten.
The
PULLEY ASSEMBLY(22)
should move freely.
STEP 3
Insert the
FOOT REST(9)
into the mounting holes located on the
FRONT FRAME(1).
The
FOOT
REST(9)
should pass through the
FRONT COVER(7)
and the
FRONT FRAME(1).
STEP 4
Insert the
FOAM PAD ASSEMBLIES(17)
into the holes located on the
CUSHION ASSEMBLY(10).
6