ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520
or e-mail us at:
6
STEP 1
Remove your
PILATES 4500 JP
from its packaging placing the product on its side, with the
LOCKING
PIN(23)
side upward. Remove the
LOCKING PIN(23)
and unfold the
MAIN FRAME ASSEMBLY
separating the half that has the attached
LOCKING PIN(23).
When completed, the frame should be
separated approximately 3 feet at the end.
STEP 2
Attach the four
RUBBER FEET(22)
to the
FRONT FRAME(1)
and
REAR FRAME(2)
with
SCREWS
(M5 x 25mm)(34).
Attach the
PLASTIC WHEELS(21)
onto the
FRONT FRAME(1)
with
WASHERS(M8)(44)
and
NYLOCK NUTS(M8)(38).
STEP 3
Unfold your
PILATES 4500 JP
to a flat position by moving the
FRONT FRAME(1)
away from the platform
end of the product in a clockwise position until fully extended.
