Assembly & Operational Instructions
3
USING THE ELECTRONIC TIMER
1. To time your workout, begin by pressing and holding the
button on the face of the timer until zeros are displayed.
Release the button.
2. Start the timer by pressing and releasing the button. Now
you are ready to begin your workout.
3. To stop or pause the timer, press and release the timer button. This freezes the
workout time. To resume your workout without losing the time displayed before
stopping or pausing, press and release the button again.
4. When you complete your workout, press and release the timer button. The timer will
automatically turn off after being in stop or pause mode for 4 minutes.
TIMER Function:
The electronic timer displays minutes and
seconds up to 99.59.
BATTERY:
The electronic timer operates with a 3v CR2032 mercury battery, included.
Replace the battery when you see inconsistencies in the display.
The safety and integrity designed into the
InMotion for Health
Pedal Exerciser
can only be maintained when the
InMotion for Health
Pedal Exerciser
is regularly
examined for damage and wear. Special attention should be given to the following:
1. A light oil is applied to the pedals of your
InMotion for Health
Pedal Exerciser
before shipping. Reapply oil if the pedals begin squeaking.
2. Verify that all nuts and bolts are properly tightened.
3. Use only Stamina Products components for maintenance and repair. For replacement
parts, contact us at [email protected] or call 1-800-375-7520.
4. Keep your
InMotion for Health
Pedal Exerciser
clean by wiping with an absorbent
cloth after use.
NOTE:
Even after the timer automatically turns off, the time that was displayed prior to
shut off will remain in memory. To resume your workout without losing the time
displayed before stopping, press and release the timer button. To clear the time
and start a new workout, start again at step 1.
MAINTENANCE
