STEP 4
Insert the
PEDAL SHAFT(32)
through holes located on the
METER POST(31).
Place a
PEDAL SPACER(33)
and a
PEDAL(34)
onto each end of the
PEDAL SHAFT(32)
and slide them toward the
METER POST(31).
Then secure the
PEDALS(34)
with
BUTTON HEAD BOLTS(M8x1.25x15mm)(51)
and
LARGE WASHERS
(M8)(36)
at both ends of the
PEDAL SHAFT(32).
NOTE:
STEP 5
Remove the
LOCKING KNOBS(13)
from the
PIVOT CONNECTOR(10).
ASSEMBLY INSTRUCTIONS
9
You need to use two Allen Wrenches to tighten the
BUTTON HEAD BOLTS(M8x1.25x15mm)(51)
at both ends of the
PEDAL SHAFT(32)
at the same time.
Summary of Contents for BODYTRAC
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Page 21: ...21 NOTES ...