STEP 4
Remove the paper covering from the foam tape inside the
FRONT COVER(7)
and
REAR COVER(8).
Place
the
FRONT COVER(7)
over the
FRONT FRAME(1).
Place the
REAR COVER(8)
over the
REAR FRAME(2).
Press the covers securely in place.
NOTE:
7
ASSEMBLY INSTRUCTIONS
The securing
SCREWS(M6x1x35mm)(42)
for the
PULLEY ASSEMBLY(26)
on each side may
need to be loosened to allow the
REAR COVER(8)
to fit securely over the frame. Refer to the inset
illustration. When retightening the screws for the
PULLEY ASSEMBLYS(26)
do not over tighten.
The
PULLEY ASSEMBLYS(26)
should move freely.
STEP 5
Insert the
FOAM PAD ASSEMBLIES(21)
into the holes located on the
CARRIAGE(12).
Summary of Contents for AeroPilates Performer XP 610
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK...
Page 18: ...18 NOTES...
