MAINTENANCE
11
The safety and integrity designed into the
AeroPilates Performer XP 610
can only be maintained when the
AeroPilates Performer XP 610
is regularly examined for damage and wear. Special attention should be
given to the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the
AeroPilates Performer XP 610
removed from service until repair is made.
Verify that the
ROPES(22)
are properly installed on the
PULLEY ASSEMBLYS(26).
Check the condition of the
ROPES(22).
Replace the Rope if it is cracked or broken.
Check the
PLASTIC HOOKS(23)
on the ends of the
ROPES(22).
Replace the Ropes with deformed or
damaged hooks.
Check the
TENSION CORDS(15)
for wear. Replace the Cords that are frayed or worn.
Check the
BUNGEE CORD(58)
on the
CARDIO REBOUNDER(56)
for wear. Replace the
CARDIO
REBOUNDER(56)
if the
BUNGEE CORD(58)
is frayed or worn.
Check the pulleys for excessive wear. Replace worn pulleys.
Check the
GRIP PADS(25)
for damage. Replace damaged parts.
Check the
FOAM SLEEVE(11)
and
FOAM PADS(21)
for damage. Replace damaged parts.
Check the
STOP PLATES(31, 33)
for looseness or bending damage. Replace damaged parts.
Check the
CUSHION(18)
for damage. Replace the
CUSHION(18)
if it is damaged.
Check and clean the rollers and the rolling surfaces on the rail. Clean by wiping with a dry cloth.
Only Stamina Products supplied components shall be used to maintain/repair the
AeroPilates Performer
XP 610
.
Keep your
AeroPilates Performer XP 610
clean by wiping with an absorbent cloth after use.
Summary of Contents for AeroPilates Performer XP 610
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK...
Page 18: ...18 NOTES...