Stamina AeroPilates Home Studio, Owner'S Manual

Page: 7 / 19

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at
customerservice@staminaproducts.com.
ASSEMBLY INSTRUCTIONS
7
STEP 1
Remove your AeroPilates ® Home Studio from its packaging, placing the product on its side with
the LOCKING PIN(30) side upward. Remove the LOCKING PIN(30) and unfold the MAIN FRAME
ASSEMBLY separating the half that has the attached LOCKING PIN(30). When completed, the frame
should form a "V" with the frame ends separated approximately three feet.
STEP 2
Attach the four RUBBER FEET(29) to the FRONT FRAME(1) and REAR FRAME(2) with ROUND
HEAD SCREWS(M5x0.8x35mm)(41). The ROUND HEAD SCREWS(M5X0.8X35mm)(41) are already
in the RUBBER FEET(29). Attach the PLASTIC WHEELS(28) onto the FRONT FRAME(1) with
WASHERS(M8)(51) and NYLOCK NUTS(M8)(47).
STEP 3
Unfold your AeroPilates ® Home Studio to a flat position by moving the FRONT FRAME(1) away
from the platform end of the
REAR FRAME(2)
in a clockwise position until fully extended. Lower the
AeroPilates ® Home Studio so all four RUBBER FEET(29) a r e flat on the floor.