OPERATIONAL INSTRUCTIONS
10
B
C
D
HEAD REST ADJUSTMENT
The
HEAD REST(19)
on the
CARRIAGE(12)
can be
positioned at an incline by simply pivoting the
SUPPORT
BRACKET
underneath the
HEAD REST(19).
SUPPORT
BRACKET
LOAD ADJUSTMENT
The resistance of the
CARRIAGE(12)
can be adjusted
by securing the
TENSION CORDS(15)
in the slots on the
FRONT FRAME(1).
You can achieve various levels of
resistance by securing different numbers of the
TENSION
CORDS(15)
in the slots.
NOTE:
Over time your
TENSION CORDS(15)
will relax. To
increase resistance in the
TENSION CORDS(15),
stretch and re-tie the tension cords in a more taut
position.
SLOTS
ROPE LENGTH ADJUSTMENT
The
ROPES(22)
feed through the
PULLEY SETS(26)
then
thread through the loops on the underside of both outer
edges of the
CARRIAGE(12).
PLASTIC SNAP HOOKS(23)
on the end of each rope are used to adjust the
ROPE(22)
length. If more length is needed, as when performing some
leg exercises, then attach the
PLASTIC SNAP HOOKS(23)
to loop
D.
To shorten, as when performing some arm
exercises, then bring the
ROPES(22)
around the last loop
D
and secure to loops
A, B,
or
C
with the
PLASTIC SNAP
HOOKS(23).
Wrap the
ROPES(22)
around and through
the loops again and attach where needed to shorten
ROPES(22)
even more.
A
Summary of Contents for AeroPilates Home Studio
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK ...
Page 18: ...NOTES 18 ...
