Stamina AeroPilates 55-5565A Owner'S Manual Download Page 14

STORAGE

MAINTENANCE

14

1.  Store the 

AeroPilates® Pro 565

 in a clean, dry place.

2.  It is recommended that two people be available to move the 

AeroPilates® Pro 565

.

3.  To move the 

AeroPilates® Pro 565

:

  First, attach one of the 

TENSION SPRINGS(31, 32)

 to the 

EYEHOOK      

(22)

 to prevent the 

PLATFORM(26)

 from moving. Second, grasp the 

PULLEY POST(39)

 and lift the 

unit from the back. Third, roll the 

AeroPilates® Pro 565

 on the moving wheels that are attached to the 

FRONT LEG(2).

The safety and integrity designed into the 

AeroPilates® Pro 565

 can only be maintained when the 

AeroPilates® Pro 565

 is regularly examined for damage and wear. Special attention should be given to 

the following:

1. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

2. Worn or damaged components must be replaced immediately or the 

AeroPilates® Pro 565

 removed 

from service until repair is made.

3. Verify that the 

CAUTION LABEL

(86)

 is present and legible. Replace the 

CAUTION LABEL

(86)

 if it is 

missing or damaged.

4. Verify that the 

ROPES(44)

 are properly installed on the 

PULLEY SETS(41).

5. Check the condition of the 

ROPES(44)

 and replace if they are frayed or worn.

6. Check the condition of the 

TENSION SPRINGS(31, 32).

 Replace the springs that are damaged.

7. Check the 

BUNGEE CORD(51)

 on the 

CARDIO REBOUNDER(49)

 for wear. Replace the 

CARDIO 

REBOUNDER(49)

 if the 

BUNGEE CORD(51)

 is frayed or worn.

8. Check the 

PULLEY SETS(41)

 for excessive wear. Replace worn 

PULLEY SETS(41).

9. Check the 

HAND/FOOT STRAPS(46)

 for damage. Replace damaged parts.

10. Check the 

FOAM SLEEVE(18), FOAM PADS(37),

 and 

FOAM PAD WEAR COVERS(84)

 and replace 

if damaged or worn.

11. Check the 

STOP PLATES(23, 24)

 for looseness or damage and replace any damaged parts.

12. Check the 

PLATFORM CUSHION(29)

 and replace if it is damaged or worn.

13. Check and clean the 

ROLLERS(27)

 and the rolling surfaces on the rails. Clean by wiping with a dry 

cloth.

14. Only Stamina Products supplied components should be used to maintain/repair the 

AeroPilates® Pro 

565

.

15. Keep your 

AeroPilates® Pro 565

 clean by wiping with an absorbent cloth after use.

Summary of Contents for AeroPilates 55-5565A
























Reviews: