ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at [email protected], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
NOTE: DO NOT SECURELY TIGHTEN ALL BOLTS UNTIL STEP 5.
STEP 1
Refer to the illustration below. Bolt the
LEFT BASE(1), RIGHT BASE(2),
and
CROSS BAR(3)
together
with
BUTTON HEAD BOLTS(M10x1.5x25mm)(12)
and
ARC WASHERS(M10)(13).
LEFT
RIGHT
Flanage Plate
face out.
