Stamina 55-9160A, Owner'S Manual

Page: 17 / 28

The safety and integrity designed into the Total Thigh Trainer can only be maintained when the Total
Thigh Trainer is regularly examined for damage and wear. Special attention should be given to the
following:
1. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
2. Verify that the
WARNING LABEL(51)
is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(51) if it is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Worn or damaged components shall be replaced immediately or the Total Thigh Trainer removed
from service until repair is made.
5. Only Stamina Products supplied components shall be used to maintain/repair the Total Thigh Trainer .
6. Keep your Total Thigh Trainer clean by wiping it off with an absorbent cloth after use.
MAINTENANCE
17
OPERATIONAL INSTRUCTIONS
SAFETY PRECAUTIONS
The remarkable design of the
Total Thigh Trainer
allows
the PEDALS(14, 15) to move front and back as well as
side to side freely. Be careful to maintain your balance while
using, mounting, and dismounting. Follow the instructions
below to safely operate the
Total Thigh Trainer:
1. To maintain your balance, always hold the
HANDLEBARS(9, 10)
with both hands while using,
mounting, and dismounting.
2. In order to avoid use by someone unfamiliar with
the
Total Thigh Trainer ,
always fold up the
PEDAL
ARMS(8) as shown.