1.
To store the
MiniStriderX
TM
,
simply keep it in a clean dry place.
2. Follow the following procedure to fold the
MiniStrider 360
TM
for easy storage.
The safety and integrity designed into the
MiniStriderX
TM
can only be maintained when the
MiniStriderX
TM
is regularly examined for damage and wear. Special attention should be given to the
following:
1.
Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
2. Verify that the
CAUTION LABEL(28)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
CAUTION LABEL(28)
if it is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Worn or damaged components shall be replaced immediately or the
MiniStriderX
TM
removed from
service until repair is made.
5.
Only Stamina Products supplied components shall be used to maintain/repair the
MiniStriderX
TM
.
6. Keep your
MiniStriderX
TM
clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
10
a. Remove the
LOCKING PIN(25)
from the
FRONT SUPPORT(2).
b. Fold the
FRONT SUPPORT(2)
in towards the
MAIN FRAME(1)
and lock in position with the
LOCKING PIN(25).
c. Detach the
PEDAL CAPS(19)
from the
SWING ARMS(17)
at the front to fold the unit as shown in
the illustration C.
d. Lift unit by the
HAND STRAP(27)
to move.
A.
B.
C.