STORAGE
Store the
AeroPilates Pro XP556
in a clean, dry place.
It is recommended that two people be available to move the
AeroPilates Pro XP556.
To move the
AeroPilates Pro XP556:
First, attach one of the
TENSION CORDS(29)
in the slot on
the
CORD HOLDER(21)
to prevent the
CARRIAGE(25)
from moving. Second, grasp the
PULLEY
POST(36)
and lift the unit from the back. Third, roll the
AeroPilates Pro XP556
on the moving wheels
that are attached to the
FRONT LEG(2).
1.
2.
3.
MAINTENANCE
The safety and integrity designed into the
AeroPilates Pro XP556
can only be maintained when the
AeroPilates Pro XP556
is regularly examined for damage and wear. Special attention should be given to
the following:
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components should be replaced immediately or the
AeroPilates Pro XP556
removed
from service until repair is made.
Verify that the Warning Label is present and legible. Replace the Warning Label if it is missing or
damaged.
Verify that the
ROPES(41)
are properly installed on the
PULLEY SETS(38).
Check the condition of the
ROPES(41)
and replace if they are frayed or worn.
Check the
PLASTIC SNAP HOOKS(42)
on the ends of the
ROPES(41).
Replace the
ROPES(41)
if
PLASTIC SNAP HOOKS(42)
are damaged or deformed.
Check the
TENSION CORDS(29).
If a
TENSION CORD(29)
is stretched and loose, re-tie the knot on
the end of the cord. Replace
TENSION CORDS(29)
that are frayed or worn.
Check the
BUNGEE CORD(48)
on the
CARDIO REBOUNDER(46)
for wear. Replace the
CARDIO
REBOUNDER(46)
if the
BUNGEE CORD(48)
is frayed or worn.
Check the
PULLEY SETS(38)
for excessive wear. Replace worn
PULLEY SETS(38).
Check the
HAND STRAPS(43)
for damage. Replace damaged parts.
Check the
FOAM SLEEVE(18)
and
FOAM PADS(34)
and replace if damaged or worn.
Check the
STOP PLATES(22, 23)
for looseness or damage and replace any damaged parts.
Check the
CUSHION(28)
and replace if it is damaged or worn.
Check and clean the
ROLLERS(26)
and the rolling surfaces on the rails. Clean by wiping with a dry
cloth.
Only Stamina Products supplied components shall be used to maintain/repair the
AeroPilates Pro
XP556.
Keep your
AeroPilates Pro XP556
clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
12
