7
ASSEMBLY INSTRUCTIONS
STEP 4
Remove the paper covering from the foam tape inside the
FRONT COVER(7)
and
REAR COVER(8).
Place
the
FRONT COVER(7)
over the
FRONT FRAME(1).
Place the
REAR COVER(8)
over the
REAR FRAME(2).
Press the covers securely in place.
STEP 5
Insert the
PULLEY RISERS(29)
into the mounting holes in the
REAR COVER(8)
and
REAR FRAME(2).
Insert the
PULLEY RISERS(22)
all the way to the bottom, align the threaded holes in the
PULLEY RISERS(29)
with the holes in the
REAR FRAME(2),
and lock the
PULLEY RISERS(29)
in position with the
LOCKING
KNOBS(30).
STEP 6
Refer to the detail drawing above showing an enlarged view of the left
PULLEY RISER(29)
and the
LEFT
PULLEY HOOK(27).
With the pulley facing down, insert the
LEFT PULLEY HOOK(27)
into the left
PULLEY
RISER(29)
from the inside as shown. Swing the pulley forward as shown and the
LEFT PULLEY HOOK(27)
will be in position for use. Use the same procedure to install the
RIGHT PULLEY HOOK(28)
on the right
PULLEY RISER(29).
Summary of Contents for 55-4296
Page 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK...
Page 17: ...17 NOTES...
