ASSEMBLY INSTRUCTIONS
9
L
R
SLIDER
CABLE END
PLASTIC FITTING
PLASTIC BRACKET
STEP 7
Set the
TENSION KNOB(27)
at position
"8".
Connect the
CABLE END
of the
TENSION KNOB(27)
into the
SLIDER
in the
PLASTIC BRACKET.
Pull on the
TENSION KNOB(27)
firmly so that enough
cable is available to insert the cable through the slot in the top of the
PLASTIC BRACKET.
Then insert
the plastic fitting on the
TENSION KNOB(27)
into the hole in the
PLASTIC BRACKET.
Install the
TENSION KNOB(27)
into the square hole on the
UPRIGHT(4)
and secure with
SCREW(M5 x 30mm)
(92)
and
WASHER(M5)(93).
STEP 8
There is a
"L"
mark on the
LEFT PEDAL CAP(41),
and a
"R"
mark on the
RIGHT PEDAL CAP(42).
Attach the
RIGHT
PEDAL CAP(42)
to the
RIGHT PEDAL SLIDER(48)
with
BUTTON HEAD BOLTS
(M8 x 20mm)(90).
Repeat on the left side.
Summary of Contents for 55-2010
Page 18: ...18 PRODUCT PARTS DRAWING FRONT BACK...
Page 22: ...22 NOTES...
