OPERATIONAL INSTRUCTIONS
USING THE INVERSION TABLE
12
1. Check the decline angle before using the
Assisted Inversion Pro.
To increase the decline, lengthen
the straps. To decrease the decline, shorten the straps.
WARNING:
DO NOT ALLOW table to invert past vertical. Table inverting past vertical may result in table
contacting frame, damage to table and serious injury to user due to fall hazard. Prior to each
use, make sure nylon and buckle straps are securely attached, as instructed in Steps 9 and
10. Adjust straps to desired angle of inversion, making sure that Main Frame does not strike
Front Frame at any time during use, as shown in illustration below.
Gap
Vertical
Past Vertical
NOTE: There must
always be a gap
between the Main
Frame and the Front
Frame when in use.
HEEL HOLDER USE AND ADJUSTMENT
Place your feet on the
FOOTREST(13)
with your ankles between the
HEEL HOLDERS(19)
and
FOAM PADS(16).
The
HEIGHT ADJUSTMENT BEAM(12)
includes a lever to grip and
release your feet. Pull the lever toward you until your ankles are securely
held between the
HEEL HOLDERS(19)
and
FOAM PADS(16).
To release your feet or relax the grip, pull the lever toward you
slightly and press the button on the end of the lever.
1.
2.
3.
Button
