ASSEMBLY INSTRUCTIONS
8
FRONT
REAR
STEP 1
Insert the
REAR STABILIZER(1)
into the
MAIN SUPPORT(3)
and secure with
HEX BOLTS(M10x1.5x20mm)
(15),
and
WASHERS(M10)(17).
STEP 2
Attach the
FRONT SUPPORT(2)
to the
MAIN SUPPORT(3)
with
HEX BOLT(M10x1.5x70mm)(14),
WASHERS(M10)(17),
and
NYLOCK NUT(M10x1.5)(19).
Lock the
FRONT SUPPORT(2)
in position
by inserting the
LOCKING PIN(11)
through the bracket on the
MAIN SUPPORT(3)
and the
FRONT
SUPPORT(2).
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at [email protected], or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on
Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
Summary of Contents for 20-2014A
Page 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK...
Page 18: ...NOTES 18...
