ASSEMBLY INSTRUCTIONS
10
STEP 6
Bolt the
HANDLEBAR SHAFTS(69)
to the
MAIN FRAME(1)
on both sides and securely tighten.
STEP 7
Slide the
WASHER(ø16.2xø22x1.5mm)(60)
onto the
HANDLEBAR SHAFT(69).
Slide the
RIGHT
HANDLEBAR(7)
onto the
HANDLEBAR SHAFT(69)
in approximately the center of the sliding range.
Place the
PLASTIC WASHER(ø10xø18x2mm)(58)
on the
SHAFT
on the lower end of the
RIGHT
HANDLEBAR(7).
Connect the right
LINKAGE(8)
to the
RIGHT HANDLEBAR(7),
then slide the
RIGHT
HANDLEBAR(7)
completely onto the
HANDLEBAR SHAFT(69).
Secure the right
LINKAGE(8)
with the
PLASTIC WASHER(ø10xø18x2mm)(58), WASHER(M8)(96),
and
NYLOCK NUT(M8x1.25)(92).
Repeat
on other side.
Shaft
Shaft
