4 feet
6 feet
Place the
STAMINA® Cycling Workstation
in the area where it will be used. It is recommended that
the
STAMINA® Cycling Workstation
be placed on an equipment mat. The
STAMINA® Cycling
Workstation
is approximately 45.1 inches long x 25.2 inches wide x 46.8 inches tall. (These dimensions
may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation of the
STAMINA® Cycling Workstation.
Make sure that adequate space is available for access to and
passage around the
STAMINA® Cycling Workstation.
LEVELING:
Adjust the location of
STAMINA® Cycling Workstation
so the bike sits on the floor without
rocking.
MOVING:
The
STAMINA® Cycling Workstation
has a pair of
WHEELS(31)
on the
REAR
STABILIZER(9).
Hold the
HANDRAIL(8)
and tilt back on
WHEELS(31)
to move the
STAMINA® Cycling Workstation.
FUNCTION INSPECTION:
Visually inspect the
STAMINA® Cycling Workstation
to verify that assembly is as shown in the above
illustration. Check the function of the
STAMINA® Cycling Workstation
by turning the crank slowly
through one complete revolution to verify that the drive train functions properly. Adjust the
TENSION
KNOB(58)
and verify that it functions properly and the resistance changes.
CAUTION:
Locate and read the
CAUTION LABEL(105)
on the
STAMINA® Cycling Workstation.
Make
sure that all users read the
CAUTION LABEL(105)
before using the product.
SET UP INSTRUCTIONS
11
Equipment Mat
(not included)
Summary of Contents for 15-0321A
Page 3: ......
