STORAGE
15
1. To store the
Stamina® Seated Upper Body Exercise Bike,
simply keep it in a clean dry place.
2. To avoid damage to the electronics, remove the batteries before storing the
Stamina® Seated Upper
Body Exercise Bike
for one year or more.
3. To move the
Stamina® Seated Upper Body Exercise Bike,
hold the
HANDRAIL(6)
and tilt the
Stamina® Seated Upper Body Exercise Bike
onto the
WHEELS(39)
of the
REAR STABILIZER(11).
4. The minimum dimensions of the
Stamina® Seated Upper Body Exercise Bike
are approximately
41.2 inches long x 23.3 inches wide x 42.4 inches tall. Please measure your
Stamina® Seated Upper
Body Exercise Bike
if exact dimensions are needed.
The safety and integrity designed into the
Stamina® Seated Upper Body Exercise Bike
can only be
maintained when the
Stamina® Seated Upper Body Exercise Bike
is regularly examined for damage
and wear. Special attention should be given to the following:
1. Adjust the
TENSION KNOB(73)
to verify that it functions properly and the resistance changes.
2.
Use a wrench to verify that the handlebars are tightened securely. If tightening is required, remember
that the left handlebar shaft has left hand threads and is tightened by turning counterclockwise.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the
CAUTION LABEL(82)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
CAUTION LABEL(82)
if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components must be replaced immediately or the
Stamina® Seated Upper Body
Exercise Bike
removed from service until repair is made.
7. Only Stamina Products supplied components should be used to maintain/repair the
Stamina® Seated
Upper Body Exercise Bike.
8. Keep your
Stamina® Seated Upper Body Exercise Bike
clean by wiping it off with an absorbent
cloth after use.
MAINTENANCE
OPERATIONAL INSTRUCTIONS
To increase the load, turn the
TENSION KNOB(73)
clockwise.
To decrease the load, turn the
TENSION KNOB(73)
counterclockwise.
HANDLEBAR LOAD ADJUSTMENT
Summary of Contents for 15-0301
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Page 22: ...NOTES 22 ...
