ASSEMBLY INSTRUCTIONS
11
STEP 10
NOTE:
The
RIGHT HANDLEBAR SHAFT(22)
has an
R
stamped on the end of the handlebar shaft. The
RIGHT HANDLEBAR SHAFT(22)
has right hand threads and is tightened by turning clockwise.
The
LEFT HANDLEBAR SHAFT(21)
has an
L
stamped on the end of the pedal shaft. The
LEFT
HANDLEBAR SHAFT(21)
has left hand threads and is tightened by turning counterclockwise.
Attach the
HANDLEBAR(48)
to the left side by threading the
LEFT HANDLEBAR SHAFT(21)
to the
LEFT
CRANK(18)
and tighten securely. The shoulder of the
HANDLEBAR SHAFT
S(21, 22)
should be in contact
with the
CRANKS(18, 19)
when securely tightened.
Repeat on the right side in order to attach the other
HANDLEBAR(48)
to the
RIGHT
CRANK(19).
STEP 11
Install two AAA batteries into the
METER(13),
the batteries are not included. See page 13 for detailed
battery installation instructions. Insert the
METER(13)
onto the
METER PLATE(50).
Connect the
SENSOR
WIRE(14)
to the connecting wire of the
METER(13).
Shoulder
Shoulder
Summary of Contents for 15-0301
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Page 22: ...NOTES 22 ...
