ASSEMBLY INSTRUCTIONS
9
STEP 3
Attach the
SHORT RAIL(3)
to the
MAIN FRAME(2)
with
BUTTON HEAD BOLT(
M6x1x15mm)(71)
and
BARREL NUT(M8x1.25x88mm)(98).
Lock the
RAIL(3)
in unfold position with the
FIXING LEVER(46)
and
LARGER WASHER(ø10.5mmxø
40mmx3mm thick)(9).
NOTE:
After tightening the
FIXING LEVER(46)
the rear stabilizer of the
BASE FRAME(1)
might be raised
off the floor slightly, this is normal, it will rest on the floor once you are seated.
STEP 4
Install two AA batteries into the
METER(52),
the batteries are not included. See page 13 for detailed
battery installation instructions. Attach the
METER POST(6)
to the
MAIN FRAME(2)
with
BUTTON HEAD
BOLT(M8x1.25x130mm)(64), WASHER(M8)(78), LOCK WASHER(M8)(81),
and
ACORN NUT(M8x1.25)
(83).
STEP 5
Refer to the detail view. Clip the
GROMMET(55)
onto both
SENSOR WIRES(54),
then press the
GROMMET(55)
into the
LEFT COVER(50).
Connect the
SENSOR WIRES(54)
to the
CONNECTION WIRES
of the
METER(52).
Push the excess wires back into the
LEFT COVER(50).
Summary of Contents for 1450
Page 2: ......