OPERATIONAL INSTRUCTIONS
PRESET VALUES OPERATION:
You can pull on the
HANDLEBAR(8)
to power on the meter and workout with the meter directly. Or, you can
preset the function values for counting down. Stop rowing for four seconds, then press the
MODE
button to
enter
setting mode. The meter will go through the input items as follows and allow you to set the function
values. Use
UP, DOWN,
and
RESET
buttons to input the values, and press
MODE
button to confirm. Or,
just press the
MODE
button to skip the setting and move on to the next function. After all the desired settings
are chosen, begin pulling on the
HANDLEBAR(8)
to start the workout.
Time (1:00 to 99:00)
Count (10 to 9990)
Distance (0.01 to 99.9 Km)
Calories (1.0 to 9999 Kcal)
Pulse (90 to 220 bpm)
NOTE:
1. You may preset values for several functions. The preset function values will start to count down.
When you complete one of the preset functions, the meter will remind you with an audible alarm for
three seconds. Then the value of this completed function will start to count up, while the other preset
functions will continue to count down.
2. The Meter will shut off automatically after 4 minutes of inactivity. All function values will be kept. Press
the
RESET
button and hold it down for two seconds to reset all functions to zero.
13
Summary of Contents for 1450
Page 2: ......
