STALGAST Radom sp. z o.o. ul. Staniewicka 5 03-310, Warsaw
tel: 22 517 15 75 fax: 22 517 15 77 www.stalgast.com e m a i l :
4
3.
CHARACTERISTICS OF DESIGN
The housing is made of stainless steel. The working surface of the appliance is mounted on a
frame with four legs, which can be used to level the pan. Leveling
is
possible within a range of
±20 mm.
The main elements of the appliance are: bowl made of stainless
steel and 6
heating elements, each
with a capacity of 1800
W.
On the front of the appliance there is a control panel, with a temperature controller, safety
thermostat and indicator lights
.
The crank mounted on the edge of the bowl is used for tipping
the bowl. Moreover, the bowl has a lid installed on hinges, which can be lifted using the handle
attached to it.
4.
INSTALLATION
•
The pan should be placed on a stable surface indoors while power supply is out. Then it must
be leveled using the adjustable feet
.
•
The pan should be set in such a way as to allow access, at least from the front.
Behind
the
appliance there should be a wall made of non-combustible materials.
•
The distance between the back of the unit and the wall made of non-combustible materials
should be at least 30 cm.
•
However, in the case where the wall is made of combustible materials (e.g. wood), the
distance should not be less than 60 cm.
•
The frying pan is fitted with a flexible power cable with a cross-section 5x2.5 mm
(without plug)
.
Appropriate plug should be installed by a qualified electrician.
PE –
yellow
-
green
N – blue
L1, L2, L3
–
other colors
Adjustable foot
