6. Mechanical speed regulation
Low speed is used for turning screws. High speed is used for drilling.
7. Turn on/off the cordless driver drill
When operating the power tool,press power switch and press it continuously.
Release the power switch to turn off the power tool.
Waring:
The machine can
be operated only if the reversing switch is pushed to the left or right.
8. Automatic shaft lock function
If you do not press the stop switch, the spindle and tool connector are locked.
Therefore, even if the battery is dead, you can use this power tool to screw,
that is, you can use this machine as a screwdriver.
9. Thermal-controlled overload protection gear
If the power tools are used according to regulations, the machine will not
overload. Under strong load conditions or the temperature of the battery is
o
outside the allowable temperature range(0-65 C), the speed of the machine
will decrease. After the temperature of the battery returns to the allowable
temperature range, the power tool can once again operate at the highest
speed.
10. LED worklight
The LED work light work by turning on power switch,operator can work with this
light in the dim light conditions.When the battery runs out, the LED worklight will
get darker and darker. It is recommended to charge in time so as not to delay
your work.
ADDITIONAL SAFETY INSTRUCTIONS
1. Use a clamp or other method to secure the workpiece to the
platform. Holding the machine or leaning the machine on the body can
cause instability.
2. Do not drill in places where there may be hidden wires.
3. Secure the workpiece. Working with a xer or vise will be more secure than
holding the workpiece by hand.
4. The workplace must be kept clean. Different work dust is easily chemically
reacted after mixing and is very dangerous. Light metal dust can easily
catch re or cause explosions.
5. Wait until the power tool is completely stationary before you can put down
the machine. The tools on the machine may be caught in the work and
you can not control the power tools.
6.This power tool can only be used with the original battery.
PL
EN
ORIGINAL INSTR
UCTION
23