For safety,must use same part for replacement when you repair the machine.
Caution!
Voltage: be attention to the voltage if it match to the power tools or not.If the voltage is
lower, it is not good for motor and working performance.
e. Repair
BATTERY USAGE CAUTION
1. Firstly determine whether the switch is in closed or neutral position,to prevent power
tools accidentally starting. It may cause work accidents if you press your nger on
the start/stop switch when carrying a power tool,or if you install the battery without
closing the power tool.
2. Never open the battery.May cause a short circuit.
3. The battery must be kept away from high temperatures, such as prolonged sun and
re. In case of excessive use at high temperatures, battery may be leaked.
4. If the battery is damaged or not used as specied,toxic vapor will be emitted from
the battery. Emitted vapor can irritate the respiratory tract. Workplaces must be air
circulated, be sure to seek immediate medical attention if there is any physical
discomfort.
5. Liquids can seep out of damaged battery and contaminate other parts.Check and
clean these parts and replace them if necessary.
6. If liquid from the battery comes into contact with the skin, rinse immediately with
soap and water. Then smear with lemon juice.
7. Physical injuries can be reduced if machine user can read and follow this regulation
carefully.
8. The battery can only be used with the original power tools. This will ensure that the
battery will not be overloaded.
9. Do not bump or damage the battery or use bumped or damaged batteries at any
time. Using damaged battery can cause possible explosion, dispose damaged
batteries immediately and quickly. Do not charge in wet or rain.You can reduce the
risk of electric shock.
6. Keep blade/drill bit cleaned and sharped, machine can be easier controlled and
no blocked in working.
7. Use machine,accessories and blade/drill bit etc. according to the manual, it is
dangerous if operation requirements are not completed.
PL
EN
ORIGINAL INSTR
UCTION
18