Stairville Stage TRI LED Bundle Extension, User Manual

Page: 32 / 60

This setting is only relevant if the unit is controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘d.xxx’ .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (the display shows ‘d.001’ … ‘d.512’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the different DMX modes.
Mode Highest possible DMX address
2-channel 511
3-channel 510
4-channel 509
7-channel 506
8-channel 505
14-channel 499
15-channel 498
Press [Setup] . Use [Up] and [Down] to select one of the following DMX operating modes:
n ‘d.-P1’ (3 channels)
n
‘d.-P2’ (4 channels)
n
‘d.-P3’ (8 channels)
DMX mode
Operating
32
Stage TRI LED Bundle Extension
LED Lighting Set