7
Operating
7.1 Starting up the device
Connect the unit to the power grid to start the operation. After a few seconds the display
shows a running reset. Then the unit is ready for use.
7.2 Main menu
Press
[Mode]
to activate the main menu and select an operating mode. Use
[Setup]
to select
further options. Use
[Up]
and
[Down]
to change the respectively shown value. When the dis‐
play shows the desired value, press
[Mode]
.
If you don't press any button for about 30 seconds, the display turns off. Press any key to reac‐
tivate the display showing the last menu.
The set values are retained even if you disconnect the device from the mains.
Operating
28
Stage TRI LED Bundle Extension
LED Lighting Set
Summary of Contents for Stage TRI LED Bundle Extension
