Installation Guide
KNUCKLE TABLE LAMP
IP20
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
UK-EU
SKU - OAK-KT-01-EU
SKU - OAK-SPHR-IV-KT-01-EU
SKU - OAK-VORN-I-KT-01-EU
SKU - WALT-KT-01-EU
SKU - WALT-SPHR-IV-KT-01-EU
SKU - WALT-VORN-I-KT-01-EU
SKU - BLOAK-KT-01-EU
SKU - BLOAK-SPHR-IV-KT-01-EU
SKU - BLOAK-VORN-I-KT-01-EU
220 - 240V~
FOR INDOOR USE ONLY
This symbol indicates that electrical and electronic equipment (WEEE) should not be mixed
with general household waste. For recovery and recycling, please take this product to a
designated collection point where it will be accepted free of charge. Many retailers offer this
in-store. Disposing of this product correctly will help save valuable resources and prevent
any potential negative effects on human health and the environment.
BEFORE STARTING
Please read instructions thoroughly before installation and
keep them for future reference. Please take extreme care
when dealing with electrical equipment.
IMPORTANT
Bulb must be installed in fixture before turning on.
WARNING
Ensure power is turned OFF before inserting plug.
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not use
abrasive materials as these will damage the finish of the
product. Do not use alcohol or other solvents.
WARRANTY AND AFTER-CARE
This product has a two-year warranty. If there appears
to be a functional defect with the product during this time,
please contact our team at [email protected].
Please note, the flexible cable attached to this luminaire
cannot be replaced; if the cable is damaged, recycle the
luminaire and seek a replacement.